TMHP10E SKF Hydraulic Jaw Puller Kit
Effortless bearing dismounting up to 100 Kn
Hydraulic jaw puller kit TMHP 10E The SKF TMHP 10E jaw puller kit is equipped with a hydraulic spindle, which facilitates effortless bearing dismounting up to 100 kN (11.2 ton US). The versatile puller kit includes three different arm sizes and can be assembled as a two-arm puller or a three-arm puller depending on the space and demand of the application.
Kit Contents
1 x arm-assembly stand
3 x arms, 115 mm (4.5 in.)
3 x arms, 160 mm (6.3 in.)
3 x arms, 200 mm (7.8 in.)
1 x hydraulic spindle TMHS 100
3 x extension pieces for hydraulic spindle; 50, 100, 150 mm (2, 4, 6 in.)
1 x nosepiece with centre point for hydraulic spindle
Maximum stroke - 80 mm (3.1 in.)
Cycle life hydraulic cylinder - Minimum 5000 cycles up to 100 kN (11.2 US ton force)
Threading hydraulic cylinder - UN 1½'' x 16 tpi
Safety valve setting hydraulic cylinder - 105 kN (11.8 US ton force)
Nominal working force - 100 kN (11.2 US ton force)
TMHP10E SKF Hydraulic Jaw Puller Kit
The hydraulic spindle is equipped with a safety valve, which minimises the risk of puller overload by limiting the applied force to 100 kN (11.2 ton US)
Long stroke of hydraulic spindle, 80 mm (3.1 in), facilitates dismounting in one operation
Extension pieces of the hydraulic spindle allow quick adaptation to pulling length
The spring-loaded centre point of the hydraulic spindle allows easy centring of the puller on the shaft without damaging it
Returns are accepted within a 90-day period, and goods will only be accepted if the following criteria is met:
Goods are still in the original, undamaged, and unopened packaging.
The item has not been used, fitted, modified, or damaged.
You have notified us no later than 90 days since receipt of goods.
Any products or quantities that have been sourced specifically to complete your order will be exempt from our standard returns policy and will be subject to handling charges. The rate of the handling charge is dependent on our suppliers’ current rates.
Products such as timing belts and ribbed belts that have been cut to your specification are also exempt from our standard returns policy.
Products that are ordered in error can also be returned, however the incurred costs for shipping will not be refunded.
Once inspection of goods has been carried out, a refund issued to the payment method used to make the initial purchase.